The electronics industry may want to look more carefully at the properties of 2D materials before incorporating them in new technologies, according to materials scientist Jun Lou.
His team recently took a closer look at an atom-thick material being eyed for flexible electronics and optical devices and found it’s more brittle than expected.
They tested the tensile strength of 2D semiconducting molybdenum diselenide and discovered that flaws as small as one missing atom can initiate catastrophic cracking under strain. The team’s report appears this month in Advanced Materials.
“It turns out not all 2D crystals are equal,” says Lou, a Rice University professor of materials science and nanoengineering. “Graphene is a lot more robust compared with some of the others we’re dealing with right now, like this molybdenum diselenide. We think it has something to do with defects inherent to these materials.”
The defects could be as small as a single atom that leaves a vacancy in the crystalline structure, he says. “It’s very hard to detect them,” he adds. “Even if a cluster of vacancies makes a bigger hole, it’s difficult to find using any technique.
“It might be possible to see them with a transmission electron microscope, but that would be so labor-intensive that it wouldn’t be useful.”
What is molybdenum diselenide?
Molybdenum diselenide is a dichalcogenide, a two-dimensional semiconducting material that appears as a graphene-like hexagonal array from above but is actually a sandwich of metallic atoms between two layers of chalcogen atoms, in this case, selenium.
Molybdenum diselenide is being considered for use as transistors and in next-generation solar cells, photodetectors, and catalysts as well as electronic and optical devices.
Lou and colleagues measured the material’s elastic modulus, the amount of stretching a material can handle and still return to its initial state, at 177.2 (plus or minus 9.3) gigapascals. Graphene is more than five times as elastic. They attributed the large variation to pre-existing flaws of between 3.6 and 77.5 nanometers.
Its fracture strength, the amount of stretching a material can handle before breaking, was measured at 4.8 (plus or minus 2.9) gigapascals. Graphene is nearly 25 times stronger.
Part of the project led by Rice postdoctoral researcher Yingchao Yang required moving molybdenum diselenide from a growth chamber in a chemical vapor deposition furnace to a microscope without introducing more defects. Yang solved the problem using a dry transfer process in place of a standard acid washing that would have ruined the samples.
To test samples, Yang placed rectangles of molybdenum diselenide onto a sensitive electron microscope platform invented by the Lou group. Natural van der Waals forces held the samples in place on springy cantilever arms that measured the applied stress.
Lou says the group attempted to measure the material’s fracture toughness, an indicator of how likely cracks are to propagate, as they had in an earlier study on graphene. But they found that pre-cutting cracks into molybdenum diselenide resulted in it shattering before stress could be applied.
“The important message of this work is the brittle nature of these materials,” Lou says. “A lot of people are thinking about using 2D crystals because they’re inherently thin. They’re thinking about flexible electronics because they are semiconductors and their theoretical elastic strength should be very high. According to our calculations, they can be stretched up to 10 percent.
“But in reality, because of the inherent defects, you rarely can achieve that much strength.
“The samples we have tested so far broke at 2 to 3 percent (of the theoretical maximum) at most,” Lou says. “That should still be fine for most flexible applications, but unless they find a way to quench the defects, it will be very hard to achieve the theoretical limits.”
Researchers from Rice, Peking University, Tsinghua University, the Georgia Institute of Technology, and Oak Ridge National Laboratory collaborated on the project. The Air Force Office of Scientific Research, the Welch Foundation, the Department of Energy Office of Basic Energy Sciences, the National Science Foundation, and the National Science Foundation of China funded the work.
Source: Rice University
The post Flaws cause cracks in material for flexible electronics appeared first on Futurity.