Graphene ‘biofoam’ makes filthy water drinkable

Engineers have found a way to use graphene oxide sheets to transform dirty water into drinking water.

The new approach combines bacteria-produced cellulose and graphene oxide to form a bi-layered biofoam. A paper detailing the research is available online in Advanced Materials.

The new biofoam is extremely light and inexpensive to make, making it a viable tool for water purification and desalination.

“We hope that for countries where there is ample sunlight, such as India, you’ll be able to take some dirty water, evaporate it using our material, and collect fresh water,” says Srikanth Singamaneni, associate professor of mechanical engineering and materials science at Washington University in St. Louis.

“The process is extremely simple,” Singamaneni adds. “The beauty is that the nanoscale cellulose fiber network produced by bacteria has excellent ability to move the water from the bulk to the evaporative surface while minimizing the heat coming down, and the entire thing is produced in one shot.

“The design of the material is novel here. You have a bi-layered structure with light-absorbing graphene oxide filled nanocellulose at the top and pristine nanocellulose at the bottom. When you suspend this entire thing on water, the water is actually able to reach the top surface where evaporation happens.

“Light radiates on top of it, and it converts into heat because of the graphene oxide—but the heat dissipation to the bulk water underneath is minimized by the pristine nanocellulose layer. You don’t want to waste the heat; you want to confine the heat to the top layer where the evaporation is actually happening.”

The way an oyster makes a pearl

The cellulose at the bottom of the bi-layered biofoam acts as a sponge, drawing water up to the graphene oxide where rapid evaporation occurs. The resulting fresh water can easily be collected from the top of the sheet.

The process in which the bi-layered biofoam is actually formed is also novel. In the same way an oyster makes a pearl, the bacteria forms layers of nanocellulose fibers in which the graphene oxide flakes get embedded.

Water filter removes toxic metals with charcoal and whey

“While we are culturing the bacteria for the cellulose, we added the graphene oxide flakes into the medium itself,” says Qisheng Jiang, lead author of the paper and a graduate student in the Singamaneni lab.

“The graphene oxide becomes embedded as the bacteria produces the cellulose. At a certain point along the process, we stop, remove the medium with the graphene oxide, and reintroduce fresh medium. That produces the next layer of our foam. The interface is very strong; mechanically, it is quite robust.”

The new biofoam is also extremely light and inexpensive to make, making it a viable tool for water purification and desalination.

“Cellulose can be produced on a massive scale,” Singamaneni says, “and graphene oxide is extremely cheap—people can produce tons, truly tons, of it. Both materials going into this are highly scalable. So one can imagine making huge sheets of the biofoam.”

Source: Washington University in St. Louis

The post Graphene ‘biofoam’ makes filthy water drinkable appeared first on Futurity.


Source: Futurity